- Roundtable - muug.ca

Re: [RndTbl] Thanks! and kudzu?
by gedetil＠cs.umanitoba.ca 14 May '02

14 May '02

According to millward: > What's kudzu ? I've read the man mount but there's > no kudzu there. What does it do? It's a utility that runs at system startup to check your hardware configuration, and allow you to setup/configure any new or changed hardware. If your system will be stable after you've set it up, you can always disable it as a startup service to speed things up a bit... chkconfig kudzu off However, I like to leave it on, so it catches any hardware changes I made, or anything that may "mysteriously" have changed. -- Gilbert E. Detillieux E-mail: <gedetil(a)cs.umanitoba.ca> Dept. of Computer Science Web: http://www.cs.umanitoba.ca/~gedetil/ University of Manitoba Phone: (204)474-8161 Winnipeg, MB, CANADA R3T 2N2 Fax: (204)474-7609

2 1

Huge audio .wav files in Red Hat
by millward 13 May '02

13 May '02

How big can I make a file in Red Hat 7.2 ? I'd like to copy an audio tape to the hard drive in one huge .wav file, and burn it to CD. I've got a few gigs of hard drive space to play with.

2 1

Thanks! and kudzu?
by millward 13 May '02

13 May '02

Thanks to the good advice I got from this roundtable I've got cdparanoi and cdrecord working just fine. Originally, cdrcord -scanbus showed nothing, but after I followed your instructions, all worked out OK. I got a couple of CDs ripped and burned and they play just fine. cdparanoia -v -s -B cdrecord -v speed=4 dev=0,1,0 -audio -pad track*.cdc.wav But a question or two about fstab Right now I've got: For my normal Creative cdrom /dev/sd0 /mnt/cdrom1 auto defaults,ro,noauto,usr,exec 0 0 For the OptoRite burner /dev/sd1 /mnt/cdrom2 iso9660 noauto,owner,kudzu,ro 0 0 The last one was created by Red Hat. What's kudzu ? I've read the man mount but there's no kudzu there. What does it do? .

1 0

Re: [RndTbl] RH 7.3 Valhalla - Wine
by gedetil＠cs.umanitoba.ca 10 May '02

10 May '02

According to Mel Seder: > Todays snail mail of MUUGlines included an article on Wine. > > Does anyone know if this new and improved version of Wine is in the 7.3 > install and if it is not, how easy/hard is getting Wine configured,up > and running. Im mostly interested in running Quicken 2002 Deluxe. Red Hat 7.3 includes the wine-20020327-1 RPM package. I don't know how that compares to the WineX 2.0 software mentioned in the newsletter article. > Other than eventually making a change to my D-Link router to accomodate > any changes by my Cable ISP (Shaw), running Quicken and the hooking up > with my daughter using my Intel Create and Share Computer Cam I don't > have and need and certainly no desire to use M$ Windows. > > P.S. I enjoy MUUGlines and the current issue is indeed a keeper :-) Thanks for the feedback. We always appreciate that, and I'm sure Kevin, our newsletter editor, especially would. -- Gilbert E. Detillieux E-mail: <gedetil(a)cs.umanitoba.ca> Dept. of Computer Science Web: http://www.cs.umanitoba.ca/~gedetil/ University of Manitoba Phone: (204)474-8161 Winnipeg, MB, CANADA R3T 2N2 Fax: (204)474-7609

1 0

RH 7.3 Valhalla - Wine
by Mel Seder 10 May '02

10 May '02

Todays snail mail of MUUGlines included an article on Wine. Does anyone know if this new and improved version of Wine is in the 7.3 install and if it is not, how easy/hard is getting Wine configured,up and running. Im mostly interested in running Quicken 2002 Deluxe. Other than eventually making a change to my D-Link router to accomodate any changes by my Cable ISP (Shaw), running Quicken and the hooking up with my daughter using my Intel Create and Share Computer Cam I don't have and need and certainly no desire to use M$ Windows. P.S. I enjoy MUUGlines and the current issue is indeed a keeper :-) melseder le petite escargot yahoo.com ===== "The sooner you make five thousand mistakes, the sooner you will be able to correct them." - Kimon Nicolaides __________________________________________________ Do You Yahoo!? Yahoo! Shopping - Mother's Day is May 12th! http://shopping.yahoo.com

1 0

cdrecord dev
by millward 10 May '02

10 May '02

Thanks for the information on SCSI emulation in Red Hat. It's good to know I don't have to do anything about that. I've read the CD-writter Howto and the man cdrecord, but I can't figure out what to enter for the 'dev' argument for cdrecord. The example shows dev=0,6,0 But that's for a SCSI device and mine is ATAPI. My burner is /dev/hdc in fstab In the BIOS its a secondary master. In windoze its E for the cdrom part and F for the burner I'm trying to copy some old tape songs into a CD. The program rec and the Gnome mixer are excellent for getting the songs into .wav files. All I need to do now is get cdrecord going. cdrecord -v speed=4 -pad -audio dev=?,?,? Any ideas about dev ? Oh, you'll notice I'm using my new, id. For some reason, somebody didn't like 'author'

4 4

SCSI emulation in Red Hat 7.2?
by author 09 May '02

09 May '02

Does Red Hat 7.2 have SCSI emulation in its kernel or do I have to install it myself? This is for burning CDs with cdrecord. For some strange reason, cdrecord only works with SCSI.

3 2

Re: [RndTbl] SCSI emulation in Red Hat 7.2?
by gedetil＠cs.umanitoba.ca 09 May '02

09 May '02

According to author: > Does Red Hat 7.2 have SCSI emulation in its kernel or > do I have to install it myself? > This is for burning CDs with cdrecord. The ide-scsi driver has been included as a kernel module at least since RH 6.2, and auto-detection and configuration of an IDE CD-RW drive has been in the installer for about as long too. > For some strange reason, cdrecord only works with SCSI. Yeah, that may be just historical, since most of these devices were only SCSI-based at first, and there was reasonably flexible support for them using the generic SCSI driver (sg) in the kernel. The ATAPI (IDE) drives implement essentially the same SCSI command set, so the ide-scsi driver was a simple and reasonable kludge to get them to work without having to rewrite a whole bunch of applications. -- Gilbert E. Detillieux E-mail: <gedetil(a)cs.umanitoba.ca> Dept. of Computer Science Web: http://www.cs.umanitoba.ca/~gedetil/ University of Manitoba Phone: (204)474-8161 Winnipeg, MB, CANADA R3T 2N2 Fax: (204)474-7609

1 0

MUUG Meeting, May 14, 7:30PM -- OpenBSD Installation
by gedetil＠cs.umanitoba.ca 07 May '02

07 May '02

[Posted to man.unix.general and other news groups] ------ Forwarded Article <ab9idc$n7d$3(a)canopus.cc.umanitoba.ca> ------ From gedetil(a)cs.umanitoba.ca (Gilbert E. Detillieux) The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting on Tuesday, May 14. The meeting topic for this month is as follows: OpenBSD Installation Did your Linux machine just get hacked? Do you want to run an operating system that hasn't had a remote root exploit in four years? Try OpenBSD. It runs on Alpha, Intel, most Macs, SPARCs, and more. It has binary emulation for most UNIX operating systems including SVR4 (Solaris), FreeBSD, Linux, BSD/OS, SunOS and HP-UX. Shawn Wallbridge from Synack Hosting and Chris Lawson and Sean Cody from Tin Foil Hat will be installing OpenBSD 3.0 on a machine and explaining the process. They will explain the ports system, how to use it and talk a bit about packages, and finally how to keep the system up to date including CVS and patches. The group holds its general meetings at 7:30 PM on the second Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. ********************************************************************** Please note our new meeting location: The IBM offices, at 400 Ellice Ave. (between Edmonton and Kennedy). When you arrive, you will have to sign in at the reception desk, and then wait for someone to take you (in groups) to the meeting room. Please try to arrive by about 7:15 PM, so the meeting can start promptly at 7:30 PM. Don't be late, or you may not get in. Limited parking is available for free on the street, or in a lot across Ellice from IBM, for $1.00 for the evening. Indoor parking is also available nearby, at Portage Place, for $2.00 for the evening. ********************************************************************** For more information about MUUG, and its monthly meetings, check out their Web server: http://www.muug.mb.ca/ Also note that MUUG maintains two mailing lists, called "muug-announce" and "roundtable". If you're not already on these lists, we encourage you to subscribe now: http://www.muug.mb.ca/mailman/listinfo/ The "muug-announce" list is used for monthly meeting announcements (such as this one) as well as other important announcements of interest to MUUG members. The "rountable" list is meant to be a forum for follow-ups to topics discussed at the meetings, or for round-table-style discussion on other topics that come up between meetings. Of course, for this to be effective, we need to reach a certain critical mass. So, please subscribe, and stay involved! -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.mb.ca> Manitoba UNIX User Group Web: http://www.muug.mb.ca/ P.O. Box 130, St-Boniface Phone: (204)474-8161 Winnipeg, MB, CANADA R2H 3B4 Fax: (204)474-7609 ------ End of Forwarded Article

1 0

Win2K Administration reference.
by Brock Wolfe 02 May '02

02 May '02

<FLAME FORCE FIELD> Having at least a minor grasp on Linux Server administration, now the evil dark forces have thrust Win2K upon me to look after as well. Since it is such a rare beast, is there a single book that is THE reference on Win2K administration (network services configurations, task automation, etc) ? I have looked at O'Reilly, MS handbooks, etc. Any testimontials from those supporting mixed servers on a network ? </FLAME FORCE FIELD> Brock

1 0