- Roundtable - muug.ca

MUUG Meeting, Tuesday, June 6, 7:30pm (Date Change, In-person/Hybrid Meeting) -- BTRFS Dedup
by Gilbert Detillieux 01 Jun '23

01 Jun '23

The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting IN PERSON, on Tuesday, June 6th, at 7:30pm. Yes, that's a week early, i.e. the FIRST Tuesday of the month... Using BTRFS Deduplication to Consolidate 90 Hard Drives This month, Chris Audet will provide a brief overview of BTRFS deduplication, as well as demonstrate a practical application - a large HDD consolidation being planned for later this year. Where to find the Meeting: Fortress Software Inc., 350 Keewatin St -- Unit #2 We have a new in-person meeting location now! Brad Vokey has graciously let us use his work office for our next in-person meeting. The meeting room will be open by 7:00 pm, with the actual meeting starting at 7:30 pm. If driving, enter the lot using the most north east entrance and drive around to the south west corner of the building (see route in map detail on poster linked below). You can use any of the free, ample, and safe parking spots that say "reserved" in front of units #1 through #4 before entering unit #2. Bus stops #30814 and #30880 (route 77) are only 150 meters away. The last bus leaves for Polo Park at 10:15 pm and for Garden City at 10:31 pm. Logan Ave. bus routes #19, #26, and #27 are a 600 meter (8 minute) walk to the south. For those unable or preferring not to attend in person, the meeting will also be available online, using BBB as usual. Stay tuned to our muug.ca home page for the official URL, which will be made available about a half hour before the meeting starts. (Reload the page if you don't see the link, or if there are issues with connecting.) *Date Change* Please note the change in meeting date for this month, and for the rest of the current year (at least until the July/August break). We are now meeting on the first Tuesday of each month. The group now holds its meetings at 7:30pm on the *first* Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. For more information about MUUG, and its monthly meetings, check out their web server: https://muug.ca/ Help us promote this month's meeting, by putting this poster up on your workplace bulletin board or other suitable public message board, or linking to it on social media: https://muug.ca/meetings/MUUGmeeting.pdf -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.ca> Manitoba UNIX User Group Web: http://muug.ca/

1 0

WordTsar – A Wordstar clone
by Adam Thompson 22 May '23

22 May '23

http://wordtsar.ca/ - WordStar for the 21st Century! You're welcome :-) -Adam Get Outlook for Android<https://aka.ms/AAb9ysg>

6 7

Re: [RndTbl] WordTsar ? A Wordstar clone
by Brock Wolfe 10 May '23

10 May '23

JOE is still my goto (pun intended) editor on any-nix platform its available. Takes me back to TurboPascal, etc, days. Brock

1 0

The Linux Fork Bomb
by Hossein Abedi Khorasgani 08 May '23

08 May '23

Hello everyone, I'm posting the info about the fork bomb sticker we had during the last meeting Specifically, this one :(){ :|:& };: Here is the page explaining how the command work: https://www.cyberciti.biz/faq/understanding-bash-fork-bomb/ Cheers, New Kevin

1 0

How does on get the date function to work in Libre Office spreadsheet?
by eh＠eduardhiebert.com 08 May '23

08 May '23

Hi, I've formatted the cells as date mm/dd/yy and entered the values as is. Also tried by preceeding with equal sign in case deemed to be a formula but neither works. I assume a difference between two days yields the difference in days, correct? Or are the formula different than plain math? Eduard the Osborne guy at last meeting

4 6

Off-topic-ish: 3D Printer for Sale
by Alberto Abrao 06 May '23

06 May '23

Hello everyone, I have a 3D Printer for sale. a Creality Ender 3 S1, with a few minor modifications. All original parts are included. It is running the Professional Firmware by MRiscoC, and produces very good prints. If you, or someone you know, is interested, please reach out to me. Thank you. Kind regards, Alberto Abrao

1 0

Reminder: MUUG Meeting, Tonight, May 2, 7:30pm (Date Change, In-person/Hybrid Meeting) -- Ansible AWX
by Gilbert Detillieux 02 May '23

02 May '23

A reminder that the MUUG meeting will be this evening, both in person and online... The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting IN PERSON, on Tuesday, May 2nd, at 7:30pm. Yes, that's a week early, i.e. the FIRST Tuesday of the month... Ansible AWX "AWX provides a web-based user interface, REST API, and task engine built on top of Ansible." In this presentation, Alberto Abrao will show how to set it up, and basic usage. Where to find the Meeting: Fortress Software Inc., 350 Keewatin St -- Unit #2 We have a new in-person meeting location now! Brad Vokey has graciously let us use his work office for our next in-person meeting. The meeting room will be open by 7:00 pm, with the actual meeting starting at 7:30 pm. If driving, enter the lot using the most north east entrance and drive around to the south west corner of the building (see route in map detail on poster linked below). You can use any of the free, ample, and safe parking spots that say "reserved" in front of units #1 through #4 before entering unit #2. Bus stops #30814 and #30880 (route 77) are only 150 meters away. The last bus leaves for Polo Park at 10:15 pm and for Garden City at 10:31 pm. Logan Ave. bus routes #19, #26, and #27 are a 600 meter (8 minute) walk to the south. For those unable or preferring not to attend in person, the meeting will also be available online, using BBB as usual. Stay tuned to our muug.ca home page for the official URL, which will be made available about a half hour before the meeting starts. (Reload the page if you don't see the link, or if there are issues with connecting.) *Date Change* Please note the change in meeting date for this month, and for the rest of the current year (at least until the July/August break). We are now meeting on the first Tuesday of each month. The group now holds its meetings at 7:30pm on the *first* Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. For more information about MUUG, and its monthly meetings, check out their web server: https://muug.ca/ Help us promote this month's meeting, by putting this poster up on your workplace bulletin board or other suitable public message board, or linking to it on social media: https://muug.ca/meetings/MUUGmeeting.pdf -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.ca> Manitoba UNIX User Group Web: http://muug.ca/

1 0

MUUG Meeting, Tuesday, May 2, 7:30pm (Date Change, In-person/Hybrid Meeting) -- Ansible AWX
by Gilbert Detillieux 25 Apr '23

25 Apr '23

The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting IN PERSON, on Tuesday, May 2nd, at 7:30pm. Yes, that's a week early, i.e. the FIRST Tuesday of the month... Ansible AWX "AWX provides a web-based user interface, REST API, and task engine built on top of Ansible." In this presentation, Alberto Abrao will show how to set it up, and basic usage. Where to find the Meeting: Fortress Software Inc., 350 Keewatin St -- Unit #2 We have a new in-person meeting location now! Brad Vokey has graciously let us use his work office for our next in-person meeting. The meeting room will be open by 7:00 pm, with the actual meeting starting at 7:30 pm. If driving, enter the lot using the most north east entrance and drive around to the south west corner of the building (see route in map detail on poster linked below). You can use any of the free, ample, and safe parking spots that say "reserved" in front of units #1 through #4 before entering unit #2. Bus stops #30814 and #30880 (route 77) are only 150 meters away. The last bus leaves for Polo Park at 10:15 pm and for Garden City at 10:31 pm. Logan Ave. bus routes #19, #26, and #27 are a 600 meter (8 minute) walk to the south. For those unable or preferring not to attend in person, the meeting will also be available online, using BBB as usual. Stay tuned to our muug.ca home page for the official URL, which will be made available about a half hour before the meeting starts. (Reload the page if you don't see the link, or if there are issues with connecting.) *Date Change* Please note the change in meeting date for this month, and for the rest of the current year (at least until the July/August break). We are now meeting on the first Tuesday of each month. The group now holds its meetings at 7:30pm on the *first* Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. For more information about MUUG, and its monthly meetings, check out their web server: https://muug.ca/ Help us promote this month's meeting, by putting this poster up on your workplace bulletin board or other suitable public message board, or linking to it on social media: https://muug.ca/meetings/MUUGmeeting.pdf -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.ca> Manitoba UNIX User Group Web: http://muug.ca/

1 0

"washing" a fork/exec to force all groups
by Trevor Cordes 20 Apr '23

20 Apr '23

Just ran into this: https://stackoverflow.com/questions/8568596/procmail-disregards-etc-group# Postfix is doing something before/while it calls procmail for local delivery which strips all but the primary group of the recipient. This means any complicated pipe I have setup in procmail which relies on secondary groups fails with read perm errors. Sendmail doesn't do this stupidity (yay)! But I needed to (argh finally) use postfix on a box that needed 2 MTAs installed (and sendmail couldn't, in the end, do it properly). I consider the current stackoverflow answer to be a non-answer because Fedora/RHEL doesn't install procmail setgid/setuid anymore, and I don't want to fudge u+s g+s on every dnf update! I've solved the problem by "washing" the procmail piped-to command through sudo. I had to add to sudoers: fooman ALL=(fooman) NOPASSWD: /bin/php and change my procmail recipe pipe to: | /bin/sudo -u fooman /bin/php /needs/secondary/groups/to/read.php Ok great, it all works with postfix now just like it did with sendmail. The tricky question for you uber *nix geeks is: Can I achieve the same thing without the sudoers entry? In other words, is there a way to achieve this without root access, if someone didn't have root on the box, say. Too bad sudo isn't smart enough to say "hey, user fooman can run anything as user fooman" without a specific entry. Maybe an option for postfix? Maybe some magic sudo or su can do? Is an option to procmail possible or is this a problem that can *only* be solved by washing the call, somewhere along the line, through a setuid program (because once stripped by postfix they are gone forever)? I wonder why sendmail doesn't chop off the groups but postfix does.

5 18

New Old Dell Server
by Scott Toderash 20 Apr '23

20 Apr '23

Hi folks, I recently came into possession of a brand new old machine and I'm wondering if anyone here might have an interest in it. The machine came to me as part of a bigger deal. I could deploy it but I don't necessarily need to so I would just as soon sell it instead. Dell PowerVault MD3200i 8 x 600GB drives installed 2U server with rails It was brand new in the box, bought by somebody I know in 2013, and he never got around to deploying it. I realize it's barely worth it due to the age, unless of course you are really into this specific hardware. If you or someone you know might be interested, email me.

3 5