Roundtable

roundtable@muug.ca

2555 discussions

Blackberry and Linux
by Mel Seder 21 Oct '03

21 Oct '03

The software that backs up and restores the Blackberry data to your computer is for Windows, which I rarely run and don't want to run. Is there an application that can backup and restore the Blackberry using linux? ===== The true measure of a man is how he treats someone who can do him absolutely no good. -Samuel Johnson, lexicographer (1709-1784)

1 0

Blackberry 950
by Mel Seder 21 Oct '03

21 Oct '03

Please forgive me if this is not appropriate for this mailing list. I purchased the pager in 2000 and stopped the service about a year or two later. Now I want to use it again as an appointment book so I got it out put in a battery and quickly found out that I forgot my password. I tried a few and now I only have 3 tries left. I'd like to completely reset the pager password and all and couldn't find out how to do that. Can anyone help me? ===== The true measure of a man is how he treats someone who can do him absolutely no good. -Samuel Johnson, lexicographer (1709-1784)

1 0

fedora
by Mel Seder 17 Oct '03

17 Oct '03

I downloaded the iso's for fedora, burnt them, and did an install. The "everything" download was a bit more than 5 GIGS. Mozilla seems to be much faster. I like using fedora so far (I'm using a beta version). when I installed fedora it seemed to run quite faster right out of the box. I can't get MusicPlayer to play a MP3 because I can't browze for that file using the MusicPlayer. Has anyone played a MP3 yet? ===== The true measure of a man is how he treats someone who can do him absolutely no good. -Samuel Johnson, lexicographer (1709-1784)

1 0

CUPS presentation
by John Lange 16 Oct '03

16 Oct '03

Regrettably, due to visiting in-laws, I was not able to attend last nights MUUG meeting. I was especially disappointed because the topic for the presentation was one that I could have benefited from. If there was any hand-outs from the CUPS presentation or other material that is available online could someone please direct me to it? Thank you. -- John Lange BigHostBox.com ltd (204) 885 0872 Toll free: 1-866-690-8297

1 0

Fedora Project Objectives
by gedetil＠cs.umanitoba.ca 15 Oct '03

15 Oct '03

Hi all. Further to last night's discussion about Fedora, and the list of objectives that was circulated, here's the URL where you can find that online: http://fedora.redhat.com/about/objectives.html Of course, there's a lot more information about the project on their web site, so feel free to have a look: http://fedora.redhat.com/ -- Gilbert E. Detillieux E-mail: <gedetil(a)cs.umanitoba.ca> Dept. of Computer Science Web: http://www.cs.umanitoba.ca/~gedetil/ University of Manitoba Phone: (204)474-8161 Winnipeg, MB, CANADA R3T 2N2 Fax: (204)474-7609

1 0

MUUG Shirts
by Shawn Wallbridge 14 Oct '03

14 Oct '03

This is a reminder that we are going to be taking Pre-Orders for MUUG Polo Shirts at the meeting tomorrow. If you want to ensure you get a shirt, please bring in a $20 deposit. We will have samples to try on. shawn

1 0

MUUG Meeting, Oct 14, 7:30PM -- UNIX Printing with CUPS and LPRng
by gedetil＠cs.umanitoba.ca 07 Oct '03

07 Oct '03

[Posted to man.unix.general and other news groups] ------ Forwarded Article <bluq9u$1f0$1(a)canopus.cc.umanitoba.ca> ------ From gedetil(a)cs.umanitoba.ca (Gilbert E. Detillieux) The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting on Tuesday, October 14. The meeting topic for this month is as follows: UNIX Printing with CUPS and LPRng This month, Adam Thompson gives us a look at printing under UNIX with the popular CUPS and LPRng systems. LPRng re-implements the traditional UNIX printing model, adding support for modern features. CUPS targets the much newer Internet Printing Protocol, but provides a traditional user interface for UNIX users. He'll try to provide some insight into the confusing variety of printer drivers that exist on Linux today. Time permitting, demonstrations will include setting up a printer and printing across a network. The group holds its general meetings at 7:30 PM on the second Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. ********************************************************************** Please note our new meeting location: The IBM offices, at 400 Ellice Ave. (between Edmonton and Kennedy). When you arrive, you will have to sign in at the reception desk, and then wait for someone to take you (in groups) to the meeting room. Please try to arrive by about 7:15 PM, so the meeting can start promptly at 7:30 PM. Don't be late, or you may not get in. Limited parking is available for free on the street, or in a lot across Ellice from IBM, for $1.00 for the evening. Indoor parking is also available nearby, at Portage Place, for $2.00 for the evening. ********************************************************************** For more information about MUUG, and its monthly meetings, check out their Web server: http://www.muug.mb.ca/ Also note that MUUG maintains two mailing lists, called "muug-announce" and "roundtable". If you're not already on these lists, we encourage you to subscribe now: http://www.muug.mb.ca/mailman/listinfo/ The "muug-announce" list is used for monthly meeting announcements (such as this one) as well as other important announcements of interest to MUUG members. The "rountable" list is meant to be a forum for follow-ups to topics discussed at the meetings, or for round-table-style discussion on other topics that come up between meetings. Of course, for this to be effective, we need to reach a certain critical mass. So, please subscribe, and stay involved! -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.mb.ca> Manitoba UNIX User Group Web: http://www.muug.mb.ca/ P.O. Box 130, St-Boniface Phone: (204)474-8161 Winnipeg, MB, CANADA R2H 3B4 Fax: (204)474-7609 ------ End of Forwarded Article

1 0

Two interesting Open Source publications
by Bill Reid 01 Oct '03

01 Oct '03

A report commisioned by the Federal Gov on the state of Open Source in Canada. It include a index containing many Open Source Canadian companies http://www.e-cology.ca/canfloss/report/ A book written by a Canadian does a very good job of analysing the issues around open source, copyright, etc. Free as in speech and beer - opensource, peer-to-peer and the economics of the online revolution. By Darren Wershler-Henry I loaned it from the Wpg Library. Enjoy, Bill

1 0

Software Patents
by John Lange 24 Sep '03

24 Sep '03

I'm new to MUUG so I hope this isn't out of line for the mailing list... As I'm sure most of you are aware, there has been a lot of activity recently in the European Union regarding software patents. Understandably, many OpenSource advocates were mortified that the EU was considering passing a bill which many perceived as opening the door to software patents similar to the system currently in place in the US. While I was thinking how grateful I am that I live in country without absurd software patent laws I suddenly had a horrifying thought... Exactly what is the state of software patents in Canada? I have heard rumours the US is strong-arming other nations into adopting legislation similar to the DMCA so can software patents be far behind? If there was a change to patent legislation in the works to allow software patents in Canada, would we be able to get organized enough to make our views known to legislators as they have done in the EU? On the other hand, should we be waiting until legislation is already on the table, or is there something pro-active we can do? -- John Lange BigHostBox.com ltd (204) 885 0872 Toll free: 1-866-690-8297

2 1

RH8 CD's?
by Shawn Wallbridge 22 Sep '03

22 Sep '03

Does anyone have any RedHat 8 CD's I could borrow tonight? Or have a link to a fast (ie, > 20KB/s) server? I need them kind of urgently. thanks shawn

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

Roundtable