- Roundtable - muug.ca

dell pe 860 rails
by Theodore Baschak 12 Oct '16

12 Oct '16

I'm looking for some rack rails for a dell poweredge 860. Does anyone local have some? Shipping on those things is always more than the item itself. Theodore Baschak - AS395089 - Hextet Systems https://ciscodude.net/ - https://hextet.systems/ http://mbix.ca/

3 2

MUUG Meeting, October 11, 7:30pm -- Physical Computing
by Gilbert E. Detillieux 10 Oct '16

10 Oct '16

The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting on Tuesday, October 11. The meeting topic for this month is as follows: Introducing Physical Computing Davidian Chorley will be our presenter this month. Introducing Physical Computing is a presentation on computing devices with GPIOs. General Purpose Input/Outputs allow interfacing with a huge variety of hardware. Davidian will discuss several platforms that implement GPIOs, why one might want to use them, his own projects and various common and creative uses for physical computing. Platforms covered are Raspberry Pi and Raspbian (Debian), Arduino (the device and IDE), and MBED programable devices from the ARM processor platform. Daemon-Dash: tinc For this month's Daemon-Dash segment, Mark Jenkins will present [13]tinc, "a Virtual Private Network (VPN) daemon that uses tunnelling and encryption to create a secure private network between hosts on the Internet." Door Prizes On top of whatever else is on offer this month, we'll have a copy of "The Book of JavaScript", 2ed, by No Starch Press as a door prize. There will also be a Raspberry Pi Model B+ being drawn. The group holds its general meetings at 7:30pm on the second Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. ****************************************************************** Please note our *NEW* meeting location for this month: *Room 1M28* (1st floor) Manitoba Hall, University of Winnipeg, entrance on Ellice Ave. between Spence St. and Balmoral St. Parking is available on the surrounding streets and in the lots on nearby streets. Look for signage once you're at the building, or ask a security guard. ****************************************************************** For more information about MUUG, and its monthly meetings, check out their web server: http://www.muug.mb.ca/ Help us promote this month's meeting, by putting this poster up on your workplace bulletin board or other suitable public message board: http://www.muug.mb.ca/meetings/MUUGmeeting.pdf -- Manitoba UNIX User Group E-mail: <gedetil(a)muug.mb.ca> c/o Gilbert E. Detillieux Web: http://www.muug.mb.ca/ University of Manitoba Phone: (204)474-8161 Winnipeg MB CANADA R3T 2N2 Fax: (204)474-7609

2 1

muug mirror - openbsd 6.0
by Theodore Baschak 10 Oct '16

10 Oct '16

Looks like the muug.ca mirror doesn't have OpenBSD 6.0 which was released Sept 1st Theodore Baschak - AS395089 - Hextet Systems https://ciscodude.net/ - https://hextet.systems/ http://mbix.ca/

2 1

Looking or sled drive caddy/mount
by Dan Keizer 05 Oct '16

05 Oct '16

Hi there -- I have an older Sun U40M2 workstation - very nicely built - and I need to mount some more drives in it, except I'm missing some drive mount caddy's/sleds ... they look like the following: [image: Inline image 1] and this with a drive in it: [image: Inline image 2] anyone have a few spares hanging around or know where to find such locally? Dan.

4 3

muug.ca debian mirror 403'ing
by Theodore Baschak 04 Oct '16

04 Oct '16

The muug.ca/mirror/debian/ mirror is 403'ing on IPv4 and IPv6. Other mirror directories look ok at a glance (fedora, debian-archive) Theodore Baschak - AS395089 - Hextet Systems https://ciscodude.net/ - https://hextet.systems/ http://mbix.ca/

4 7

Re: [RndTbl] parallel NFS, pNFS
by Grigory Shamov 27 Sep '16

27 Sep '16

http://open-pnfs.org/?reqp=1&reqr= is pending for renewal or deletion. I guess, that tells something. -- Grigory Shamov On 2016-09-27, 4:10 PM, "roundtable-bounces(a)muug.mb.ca on behalf of Grigory Shamov" <roundtable-bounces(a)muug.mb.ca on behalf of Grigory.Shamov(a)umanitoba.ca> wrote: >Hi All, > >Had anyone ever used pNFS? > >Is there a free pNFS server implementation that is useful, or only >Dell/Panasas products are usable? > >And finally, would you run NFS or pNFS off ZFS JBOD backend, are there any >hidden rocks? > >Lots of questions... > >-- >Grigory Shamov > >Westgrid/ComputeCanada Site Lead >University of Manitoba >E2-588 EITC Building, >(204) 474-9625 > > > > > > >_______________________________________________ >Roundtable mailing list >Roundtable(a)muug.mb.ca >http://www.muug.mb.ca/mailman/listinfo/roundtable

1 0

parallel NFS, pNFS
by Grigory Shamov 27 Sep '16

27 Sep '16

Hi All, Had anyone ever used pNFS? Is there a free pNFS server implementation that is useful, or only Dell/Panasas products are usable? And finally, would you run NFS or pNFS off ZFS JBOD backend, are there any hidden rocks? Lots of questions... -- Grigory Shamov Westgrid/ComputeCanada Site Lead University of Manitoba E2-588 EITC Building, (204) 474-9625

1 0

Re: [RndTbl] Anyone have any Captive Portal set-up experience?
by Bradford C. Vokey 21 Sep '16

21 Sep '16

Hello Andrew, I mentioned your request for Captive Portal recommendations at our last Manitoba Unix User Group general meeting. The consensus was to purchase a MikroTik router and use their HotSpot Gateway software (http://wiki.mikrotik.com/wiki/Manual:License#License_Levels) Their level 4 license (a one-time fee of only $45) gives you access to 200 active hotspot users at once and 15 days of initial config support. Here is a good article about setting it up: http://www.mikrotik.com.my/hotspot-server-with-captive-portal-and-walled-ga… Looks like a good solution to me! Anyone have any recommendation as to *which* model MikroTik router he should get for this hotel? === Bradford C. Vokey Treasurer Manitoba Unix User Group === On 2016-09-14 3:36 PM, Tech wrote: > Re: Anyone have any Captive Portal set-up experience?

2 1

Re: [RndTbl] Anyone have any Captive Portal set-up experience?
by Bradford C. Vokey 21 Sep '16

21 Sep '16

From my nephew... Anyone interested in setting up a linux box for this hotel for a fee? -------- Forwarded Message -------- Subject: RE: Roundtable Digest, Vol 141, Issue 6 Date: Wed, 14 Sep 2016 15:36:16 -0500 From: Tech <tech(a)ebytesonline.com> To: 'Bradford C. Vokey' <brad(a)fsi.ca> We totally understand that the hardware we have listed is highly below a “proper” infrastructure. Our 1^st goal was to get internet divided, corporate, and public for security reasons. We then were told to try to, as economically as possible, to replace OLD devices with new ones to give as much performance to the current setup they had. We were able to add an additional router / converted to Access point, for load balancing, for only the 2^nd floor. Understanding the limits, and not being able to change that, the linux box solution if we could implement it in the current network, would be great. Is there a linux box, that we could buy from anyone willing to create it, (we could supply the computer – if a spec list was given // understanding it would need 3 nic cards already mentioned) ? *We would need a quote for your programming time, some minor instruction to add it to our network, and what we would have to change – router settings, etc*. Also to have a friendly GUI (if possible) to only change the wifi password once a month. This would be done by the hotel manager whom does not have any computer experience. ---------------------------------------------------------------------- Message: 1 Date: Mon, 12 Sep 2016 15:09:21 -0500 From: Adam Thompson<athompso(a)athompso.net> <mailto:athompso@athompso.net> To: Continuation of Round Table discussion<roundtable(a)muug.mb.ca> <mailto:roundtable@muug.mb.ca>, Robert Keizer<robert(a)keizer.ca> <mailto:robert@keizer.ca> Subject: Re: [RndTbl] Anyone have any Captive Portal set-up experience? Message-ID:<F20215F7-211C-4AA2-AF09-EA742B3E66E8(a)athompso.net> <mailto:F20215F7-211C-4AA2-AF09-EA742B3E66E8@athompso.net> Content-Type: text/plain; charset="utf-8" Unfortunately, that's a dog's breakfast of consumer-grade hardware that should never have been installed in a commercial setting in the first place. Shaw's offering is actually a pretty good price, surprisingly. He could buy a pfSense/Netgate SG-2440 to replace the (p.o.s., IMHO) RV320 and get captive portal functionality built in. I would replace all the wireless with Ubiquity. But obviously the hotel doesn't want to spend any actual money on this, so... Grab an old PC, put 3 NICs in it, install pfSense Community Edition, and off to the races. -Adam On September 12, 2016 9:46:11 AM CDT, Robert Keizer<robert(a)keizer.ca> <mailto:robert@keizer.ca> wrote: >I've used simple dd-wrt captive portal and it worked. > >I'm fairly certain the ubiquity has a similar feature that I've touched >with as well. > >There are a few companies such as cloudessa that provide 'cloud captive >portal services'.. that might be what you're looking for. I can't vouch >for them at all though; > > * >http://cloudessa.com/products/cloudessa-aaa-and-captive-portal-cloud-servic… > > > > >On 2016-09-12 8:45 AM, Bradford C. Vokey wrote: >> >> My nephew needs a recommendation for a captive portal service for a >> hotel. >> >> Has anybody ever set one of these up? Advice? >> >> Here are his particulars: >> >>> Hello to all who read this, >>> My name is Andrew Popowich, and I was encouraged to send an email to >>> this group in possibly getting some help. A hotel where I live, is >>> needing a Guest Splash page to appear whenever someone connects to >>> the wifi in the hotel. (Every time it is connected ? I will explain) >>> The internet is through Shaw, getting 150 open internet if they >don?t >>> have it already by now. We installed a Cisco RV320 (non WebFi unit) >>> to split the internet into 2 networks. (192.168.130.1 ? corporate // >>> no wifi) and (192.168.123.1 ? Guest wifi // no wired) We added a TP >>> LINK 750 as the router for Wifi communication, connected to a >switch, >>> and then from the switch, 2 X TP LINK Archer C7 1750 as access >>> points(dhcp disabled), and an enGenius 2.4 Ghz outdoor Access point >>> (dhcp disabled) to spread more coverage. My question is this : What >>> can I add to economically get a splash page to show every time a >>> guest connects to the public wifi, including, when they leave the >>> hotel, and come back, they have to re-sign in to that splash page to >>> continue using the internet in their rooms ? I have access to >>> computer parts and etc, if a computer can be added in the line to do >>> this task, or will that idea even work ? Let me know if more >>> information is needed. I appreciate any help I can get on this, >>> Andrew Popowich p.s. I spoke with Shaw Business and they stated >since >>> the hotel has 53 rooms, the cost for Shaw?s Managed Wifi service, is >>> $700 a month. And they would not be able to use ANY of the equipment >>> that we have added in the past 4 months, total of that being around >>> $2000.00 for equipment, and labor. >> === Bradford C. Vokey Treasurer Manitoba Unix User Group === >> >> _______________________________________________ >> Roundtable mailing list >>Roundtable(a)muug.mb.ca <mailto:Roundtable@muug.mb.ca> >>http://www.muug.mb.ca/mailman/listinfo/roundtable > > > >------------------------------------------------------------------------ > >_______________________________________________ >Roundtable mailing list >Roundtable(a)muug.mb.ca <mailto:Roundtable@muug.mb.ca> >http://www.muug.mb.ca/mailman/listinfo/roundtable

1 0

Anyone have any Captive Portal set-up experience?
by Bradford C. Vokey 13 Sep '16

13 Sep '16

My nephew needs a recommendation for a captive portal service for a hotel. Has anybody ever set one of these up? Advice? Here are his particulars: > Hello to all who read this, > My name is Andrew Popowich, and I was encouraged to send an email to > this group in possibly getting some help. A hotel where I live, is > needing a Guest Splash page to appear whenever someone connects to the > wifi in the hotel. (Every time it is connected – I will explain) The > internet is through Shaw, getting 150 open internet if they don’t have > it already by now. We installed a Cisco RV320 (non WebFi unit) to > split the internet into 2 networks. (192.168.130.1 – corporate // no > wifi) and (192.168.123.1 – Guest wifi // no wired) We added a TP LINK > 750 as the router for Wifi communication, connected to a switch, and > then from the switch, 2 X TP LINK Archer C7 1750 as access points(dhcp > disabled), and an enGenius 2.4 Ghz outdoor Access point (dhcp > disabled) to spread more coverage. My question is this : What can I > add to economically get a splash page to show every time a guest > connects to the public wifi, including, when they leave the hotel, and > come back, they have to re-sign in to that splash page to continue > using the internet in their rooms ? I have access to computer parts > and etc, if a computer can be added in the line to do this task, or > will that idea even work ? Let me know if more information is needed. > I appreciate any help I can get on this, Andrew Popowich p.s. I spoke > with Shaw Business and they stated since the hotel has 53 rooms, the > cost for Shaw’s Managed Wifi service, is $700 a month. And they would > not be able to use ANY of the equipment that we have added in the past > 4 months, total of that being around $2000.00 for equipment, and labor. === Bradford C. Vokey Treasurer Manitoba Unix User Group ===

5 4