The following was clipped from the CUPS Manual
======================================= Automatic Configuration of Print Queues
CUPS supports automatic client configuration of printers on the same subnet. To configure printers on the same subnet, do nothing. Each client should see the available printers within 30 seconds automatically. The printer and class lists are updated automatically as printers and servers are added or removed. =======================================
My downstairs computer has no printer attached to it. The only printer I have is connected to my upstairs computer. I'd like to be able to print jobs on the upstairs computer when I am logged into the downstairs computer.
My question is;
I couldn't/didn't find any examples in the manual that explained what has to be done in a "for dummies" fashion.
Do I have to have the CUPS service started and active on the downstairs computer so that it can function as a client of the upstairs computer where the printer is attached?
===== "The sooner you make five thousand mistakes, the sooner you will be able to correct them." - Kimon Nicolaides
__________________________________________________ Do you Yahoo!? New DSL Internet Access from SBC & Yahoo! http://sbc.yahoo.com
On Wed, Sep 25, 2002 at 10:11:29PM -0700, Mel Seder wrote:
The following was clipped from the CUPS Manual
======================================= Automatic Configuration of Print Queues
CUPS supports automatic client configuration of printers on the same subnet. To configure printers on the same subnet, do nothing. Each client should see the available printers within 30 seconds automatically. The printer and class lists are updated automatically as printers and servers are added or removed. =======================================
My downstairs computer has no printer attached to it. The only printer I have is connected to my upstairs computer. I'd like to be able to print jobs on the upstairs computer when I am logged into the downstairs computer.
My question is;
I couldn't/didn't find any examples in the manual that explained what has to be done in a "for dummies" fashion.
Do I have to have the CUPS service started and active on the downstairs computer so that it can function as a client of the upstairs computer where the printer is attached?
Make sure cups has Browsing set to on on each machine and that the browsing subnet and permitted connections in the cupsd.conf file are set properly for your subnet. Many systems ship with a default file that only allows localhost to use the printer.
After that, you should see the printer in /etc/printcap.cups or just by doing lpq on either machine.
I have occationally had to manually copy the /etc/cups/ppd dir's contents to each other machine for them to have the right ppd, but not always. I am not sure why this happens sometimes.
Lennart Sorensen
-
Lennart Sorensen -
Mel Seder