Here's a pic of the first DSL modem they rolled out to customers.
http://24.77.241.77/~sean/escape/adsl.jpg
I'm pretty sure it was RJ-45. In either case, if the cable plugs directly into the card it's probably cable, if there's a T it's Ethernet.
Sean
On Wed, Feb 5, 2014 at 11:18 AM, Gilbert E. Detillieux < gedetil@cs.umanitoba.ca> wrote:
On 05/02/2014 10:59 AM, Hartmut W Sager wrote:
I do consider it quite possible that this is simply a 10Base-2 NIC, and that MTS supplied such NIC's at one time (to match some ancient DSL modem), even though I don't distinctly remember this from my MTS past.
While I'd have no trouble believing MTS supplied 10-Base-2/T combo cards in the early days, I'd have trouble believing their early DSL modems actually used coax only. But that could be the case. (I'd say you'd have to go back quite a bit more than a decade, though.)
A hub isn't needed - 10Base-2 has all the stations (computers, etc.)
along a linear cable with T-connectors at each of them, even the two end units, and a terminating resistor on the otherwise open-ended T-connector at each of the two ends.
Man, I hated wiring the connectors onto those 10Base-2 cables! Anyone out there old enough to have handled the even older 10Base-5 stuff? You gotta love RJ-45!
Ah, memories!... In my first few years in my current jobs (almost 25 years ago now), I did work with some (inherited) 10Base-5 nodes, with the old external transceivers and stinger taps. I don't remember having to actually install one myself, however.
We did run 10Base-2 thin coax for a number of years, and I did install a number of external transceivers on that, as well as BNC T connectors for interfaces with internal transceivers. This would include running a temporary bypass cable (which we affectionately called the "hyper-space bypass") between two points, so that we could splice into a section of previously "live" cable to install new connectors for new drops. We got comfortable enough with doing this that we could add new drops on a wire without anyone on that segment even noticing an outage (except for maybe in the room where we were working, which was being bypassed).
Fun stuff... I don't miss it at all, though. :)
Gilbert
On 5 February 2014 09:50, Colin Stanners <cstanners@gmail.com
mailto:cstanners@gmail.com> wrote:
Likely: PC TV-capture card, or they're really confusing an ethernet cable. Very unlikely: ancient 10base-2 NIC to a hub somewhere with their DSL modem. On Wed, Feb 5, 2014 at 8:40 AM, Kevin McGregor <kevin.a.mcgregor@gmail.com <mailto:kevin.a.mcgregor@gmail.com>>wrote:
Friends of my parents have had MTS Internet service for a decade or more (probably more). They told me that they have a coax cable in the room with their computer (an IBM Pentium 4 3.0 GHz, to give you an idea of the age of this setup; they had MTS Internet service before that in an older computer) AND that this coax cable plugs directly into their PC.Has anyone seen this sort of setup? I didn't look at it myself; this is just what I got from them over the phone just now. Are they mistaken, or did MTS in the past provide a PC card with a coax connector for Internet access? It's possible that they didn't recognize an Ethernet cable, but I did explicitly ask if it was connected to the computer with a screw-on type connector which they confirmed it was. Kevin-- Gilbert E. Detillieux E-mail: gedetil@muug.mb.ca Manitoba UNIX User Group Web: http://www.muug.mb.ca/ PO Box 130 St-Boniface Phone: (204)474-8161 Winnipeg MB CANADA R2H 3B4 Fax: (204)474-7609
Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable