September 2013 - Roundtable

IBM "clicky" keyboards
by Adam Thompson 13 Oct '16

13 Oct '16

Enough people have wondered/asked/complained to me about this that I'm posting this now as a public service. IBM Model "M" keyboards are still available, *NEW*, today. They are expensive, but they are the original design that you can use as a melee weapon. The catch is that they don't say "IBM" or even "Lexmark" on them. They are available for purchase from the manufacturer, Unicomp, who can be found online at http://www.pckeyboard.com/. You can also find some vintage NIB units from time to time at http://www.clickykeyboards.com/. There are also a number of other manufacturers now making similar, but not quite as good, keyboards. - CVT Inc., the maker of the Avant Stellar (I own two of them), which is the direct descendant of the Northgate Omnikey, seems to have restructured and no trace of their keyboard manufacturing operation can be found online. However, Northgate keyboards are still available new-in-box from (this is a horrible site, beware) http://www.northgate-keyboard-repair.com/. - The Happy Hacking keyboard (now owned by Fujitsu, apparently) is equally comforting to some people despite having a totally different feel. They, and many others, can be had from http://www.elitekeyboards.com/ - Das Keyboard - Anything using Cherry MX Green, Blue, or White keyswitches. The "green" switches apparently are the closest anyone's come yet to emulating the IBM/Lexmark/Unicomp switches... and they can be had in MUCH cheaper keyboards, like the Rosewill RK-9000 (http://www.newegg.ca/Product/Product.aspx?Item=N82E16823201040 and http://techreport.com/review/23405/rosewill-rk-9000-series-mechanical-ke yboards-reviewed). - And there are an increasing number (yes, again, after the big die-off ca. 2009) of speciality manufacturers of "ergonomic" keyboards that are making clicky keyswitches available as an option. One of the better ones is a tiny shop in Ontario, but I can't find the name right now. References: http://en.wikipedia.org/wiki/Model_M_keyboard http://en.wikipedia.org/wiki/Unicomp http://deskthority.net/wiki/Cherry_MX -Adam Thompson athompso(a)athompso.net

7 12

SpamAssassin false positives on DATE_IN_FUTURE_96_Q?
by Gilbert E. Detillieux 23 Feb '16

23 Feb '16

I mentioned this problem at the last round-table session, but didn't get a solution, so I thought I'd post it here, just in case anyone has any suggestions to offer. I'm still seeing a whole bunch of false positives in SpamAssassin, since an update was installed in mid-September on a CentOS 5.7 system, for a rule called DATE_IN_FUTURE_96_Q, which is only supposed to be triggered when the "Date:" header has a date that is 4 days to 4 month ahead of the date in the "Received" header that has the _smallest_ difference in date. Here are the headers from the latest e-mail I've received with this false-positive. (I've stripped out irrelevant headers, for the sake of clarity and simplicity.) From topfivestories(a)messagent.itworldcanada.com Mon Nov 14 07:50:13 2011 Received: from mail.messagent.itworldcanada.com (mail.messagent.itworldcanada.com [207.112.10.80]) by palladium.cs.umanitoba.ca (8.13.8/8.13.8) with SMTP id pAEDoAxV028594 for <gedetil(a)cs.umanitoba.ca>; Mon, 14 Nov 2011 07:50:12 -0600 Date: Mon, 14 Nov 2011 08:50:13 -0500 X-Spam-Status: No, score=-0.3 required=5.0 tests=BAYES_00,DATE_IN_FUTURE_96_Q, HTML_MESSAGE,RP_MATCHES_RCVD autolearn=no version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on palladium.cs.umanitoba.ca Note that I'm calling spamd via the spamass-milter on a system running sendmail. Note also, that in the above example, the only "Received" header was the one generated by my own server. (I've had other false positives, however, with multiple "Received" headers, all of which were within seconds of the time in the "Date" header.) Any ideas? -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.mb.ca> Manitoba UNIX User Group Web: http://www.muug.mb.ca/ PO Box 130 St-Boniface Phone: (204)474-8161 Winnipeg MB CANADA R2H 3B4 Fax: (204)474-7609

6 11

big scanner
by Trevor Cordes 27 May '15

27 May '15

Does anyone have big (like tabloid or bigger) scanner they want to sell? Even an ancient SCSI or parallel one might be ok. I just want *big*. Do they even make scanners bigger than legal or tabloid?

4 6

Re: [RndTbl] Roundtable Digest, Vol 105, Issue 6
by Kat 29 Sep '13

29 Sep '13

Will you need the scanner often, Trevor, or only occasionally? I know when I worked at Kendrick's the production copiers had a very fast scanner (feeder, though glass was available) for up to 12x18 (greyscale or bitmap), and a slower standalone scanner with feeder & flatbed that would do colour (up to 12x18). Save straight to PDF, and pricing was based on time + a small flat fee ($2-5?). Some place like Staples probably has something too, though I suspect you'll have more luck with the smaller print shops, especially if you want it in colour. Similar to what Adam suggested - we also had a few artists who paint on huge canvases (6'x6' and bigger) that would take photos of their work. Then they'd tweak it in Photoshop to correct some colours so they could make prints for sale. If you're scanning something like text, playing with the Curves & Levels in Photoshop will help tweak it to get white paper and dark, sharp text (assuming you're not scanning as bitmap!)

2 1

need Dell power supply...
by Kat 10 Sep '13

10 Sep '13

Looking for a power supply for a Dell PowerEdge 2650. Anyone have one they want to sell (or loan for a week?) -- ------------------------------------------------------------ Katherine Scrupa Network Technology CCNA, Hons.

2 1

MUUG Meeting, Sept 10, 7:30pm -- Cross-Platform GUI Programming
by gedetil＠cs.umanitoba.ca 04 Sep '13

04 Sep '13

The Manitoba UNIX User Group (MUUG) will be holding its next monthly meeting on Tuesday, September 10. The meeting topic for this month is as follows: Cross-Platform GUI Programming Cross-platform GUI programming is a reality today, not the pipe dream many imagine it to still be. Doing so effectively requires using cross-platform tools, however, which programmers may not have even heard of. Adam will demonstrate the Lazarus programming environment for Windows and Linux, showing how easy it is to build, debug and run the same program under either or both operating systems. For the RTFM, Kevin McGregor will present a pseudo-randomly chosen item from CLIMagic's Twitter feed! The group holds its general meetings at 7:30pm on the second Tuesday of every month from September to June. (There are no meetings in July and August.) Meetings are open to the general public; you don't have to be a MUUG member to attend. ***************************************************************** Please note our *NEW* meeting location for this month: Room 1L08, Lockhart Hall, University of Winnipeg, entrance on Ellice Ave. between Spence St. and Balmoral St. Parking is available on the surrounding streets and in the lots on nearby streets. Look for signage once you're at the building, or ask a security guard. ***************************************************************** For more information about MUUG, and its monthly meetings, check out their Web server: http://www.muug.mb.ca/ Help us promote this month's meeting, by putting this poster up on your workplace bulletin board or other suitable public message board: http://www.muug.mb.ca/meetings/MUUGmeeting.pdf -- Gilbert E. Detillieux E-mail: <gedetil(a)muug.mb.ca> Manitoba UNIX User Group Web: http://www.muug.mb.ca/ PO Box 130 St-Boniface Phone: (204)474-8161 Winnipeg MB CANADA R2H 3B4 Fax: (204)474-7609

1 0