I'm cleaning out old hardware to make space, here's the more interesting pieces, if anyone wants them please reply or call my cell 797-1617:
MicroVAX 3800 (makes a great bedside table) Digital Server 3000 (Alpha CPU-based, PSU modded to feed CPU 3.3V direct) Sparq portable 1GB-disk drive with 3 disks Backer32 (parallel port video 'modem', 4GB on VHS tape) IBM Token Ring Concentrator 3x new Fujitsu fiber cables, 61meter, 2 fibers, ST-ST connectors Laboratory tube PSU, variable 200-325V 0.1A Ribbon cable in foil wrap, approx. 50 wires, 200ft? Konika-Minolta Magicolor 330, huge colour laser printer, needs toner/work Eurologic 4-drive SCSI/SAS array with redundact PSUs, serial mgmt Eurologic Fiberchannel 7x 73GB (1 HD bad) RAID array with redundant PSUs, fans A few 2.4ghz wifi dishes, 19-24dbi
I'm bringing a bunch of 300-800mhz PCs, 10mbit hubs, etc. to recycling places.
On 10-08-03 01:25 PM, Colin Stanners wrote:
I'm cleaning out old hardware to make space, here's the more interesting pieces, if anyone wants them please reply or call my cell 797-1617:
MicroVAX 3800 (makes a great bedside table) Digital Server 3000 (Alpha CPU-based, PSU modded to feed CPU 3.3V direct) Sparq portable 1GB-disk drive with 3 disks Backer32 (parallel port video 'modem', 4GB on VHS tape) IBM Token Ring Concentrator 3x new Fujitsu fiber cables, 61meter, 2 fibers, ST-ST connectors Laboratory tube PSU, variable 200-325V 0.1A Ribbon cable in foil wrap, approx. 50 wires, 200ft? Konika-Minolta Magicolor 330, huge colour laser printer, needs toner/work Eurologic 4-drive SCSI/SAS array with redundact PSUs, serial mgmt Eurologic Fiberchannel 7x 73GB (1 HD bad) RAID array with redundant PSUs, fans A few 2.4ghz wifi dishes, 19-24dbi
I'm bringing a bunch of 300-800mhz PCs, 10mbit hubs, etc. to recycling places.
Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
I may be interested in the wifi dishes. Would they be suitable for connecting to my d-link (N) router? I realise they are for point to point transmission/reception. Other than that, what are their capabilities?
I'll forward your original message to another geek friend who is a bit of a collector.
Later Mike
I'm interested in the wifi dishes as well.
On 2010-08-03, at 1:25 PM, Colin Stanners wrote:
I'm cleaning out old hardware to make space, here's the more interesting pieces, if anyone wants them please reply or call my cell 797-1617:
MicroVAX 3800 (makes a great bedside table) Digital Server 3000 (Alpha CPU-based, PSU modded to feed CPU 3.3V direct) Sparq portable 1GB-disk drive with 3 disks Backer32 (parallel port video 'modem', 4GB on VHS tape) IBM Token Ring Concentrator 3x new Fujitsu fiber cables, 61meter, 2 fibers, ST-ST connectors Laboratory tube PSU, variable 200-325V 0.1A Ribbon cable in foil wrap, approx. 50 wires, 200ft? Konika-Minolta Magicolor 330, huge colour laser printer, needs toner/work Eurologic 4-drive SCSI/SAS array with redundact PSUs, serial mgmt Eurologic Fiberchannel 7x 73GB (1 HD bad) RAID array with redundant PSUs, fans A few 2.4ghz wifi dishes, 19-24dbi
I'm bringing a bunch of 300-800mhz PCs, 10mbit hubs, etc. to recycling places.
Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
I would like an old Alpha capable of running OpenVMS. Just to keep my skills up. I bid on a contract a few years ago to replace an old VAX with a new model system; didn't get it simply because I wasn't American. But I doubt they would find anyone with 1989 certification for VMS. The MicroVAX is pre-Alpha (I remember administering a 3000 series), but can your Digital Server run OpenVMS? I have a CD with VMS Alpha 7.2-2 OS binaries.
As for old PCs, I volunteer with Mike Pfaiffer at a computer lending library. They could use any P4 PCs.
By the way, what is a "Laboratory tube PSU, variable 200-325V 0.1A"?
Rob Dyck
-----Original Message----- From: roundtable-bounces@muug.mb.ca [mailto:roundtable-bounces@muug.mb.ca] On Behalf Of Colin Stanners Sent: Tuesday, August 03, 2010 12:25 PM To: Continuation of Round Table discussion Subject: [RndTbl] Cleaning out less-common hardware
I'm cleaning out old hardware to make space, here's the more interesting pieces, if anyone wants them please reply or call my cell 797-1617:
MicroVAX 3800 (makes a great bedside table) Digital Server 3000 (Alpha CPU-based, PSU modded to feed CPU 3.3V direct) Sparq portable 1GB-disk drive with 3 disks Backer32 (parallel port video 'modem', 4GB on VHS tape) IBM Token Ring Concentrator 3x new Fujitsu fiber cables, 61meter, 2 fibers, ST-ST connectors Laboratory tube PSU, variable 200-325V 0.1A Ribbon cable in foil wrap, approx. 50 wires, 200ft? Konika-Minolta Magicolor 330, huge colour laser printer, needs toner/work Eurologic 4-drive SCSI/SAS array with redundact PSUs, serial mgmt Eurologic Fiberchannel 7x 73GB (1 HD bad) RAID array with redundant PSUs, fans A few 2.4ghz wifi dishes, 19-24dbi
I'm bringing a bunch of 300-800mhz PCs, 10mbit hubs, etc. to recycling places.
_______________________________________________ Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
I made a mistake - in my rush to clear out the garage and schedule pick-ups, I gave the Alpha to someone else who I assumed was Rob. My apologies Rob, if the guy who got it (I'm not good with noting/remembering names) doesn't need it, please let me or Rob know and I'll arrange to deliver it. Also if I see other Alpha gear around I'll let Rob know.
On 8/3/2010 1:55 PM, Robert Dyck wrote:
I would like an old Alpha capable of running OpenVMS. Just to keep my skills up. I bid on a contract a few years ago to replace an old VAX with a new model system; didn't get it simply because I wasn't American. But I doubt they would find anyone with 1989 certification for VMS. The MicroVAX is pre-Alpha (I remember administering a 3000 series), but can your Digital Server run OpenVMS? I have a CD with VMS Alpha 7.2-2 OS binaries.
As for old PCs, I volunteer with Mike Pfaiffer at a computer lending library. They could use any P4 PCs.
By the way, what is a "Laboratory tube PSU, variable 200-325V 0.1A"?
Rob Dyck
Mixup of two different robs :) I phoned you when I saw the message, but whatever the case I don't need it that much. I can drive it back to Colin tomorrow ( thursday ) if that works.
Robert
On 10-08-03 09:06 PM, Colin Stanners wrote:
I made a mistake - in my rush to clear out the garage and schedule pick-ups, I gave the Alpha to someone else who I assumed was Rob. My apologies Rob, if the guy who got it (I'm not good with noting/remembering names) doesn't need it, please let me or Rob know and I'll arrange to deliver it. Also if I see other Alpha gear around I'll let Rob know.
On 8/3/2010 1:55 PM, Robert Dyck wrote:
I would like an old Alpha capable of running OpenVMS. Just to keep my skills up. I bid on a contract a few years ago to replace an old VAX with a new model system; didn't get it simply because I wasn't American. But I doubt they would find anyone with 1989 certification for VMS. The MicroVAX is pre-Alpha (I remember administering a 3000 series), but can your Digital Server run OpenVMS? I have a CD with VMS Alpha 7.2-2 OS binaries.
As for old PCs, I volunteer with Mike Pfaiffer at a computer lending library. They could use any P4 PCs.
By the way, what is a "Laboratory tube PSU, variable 200-325V 0.1A"?
Rob Dyck
Rob: will speak with you later today
Mike/Sean: will check the number of dishes and condition and let you know
Mark: I don't have many ATX power supplies without the leaky-capacitor issues (or that are a quality brand). I'm about to recycle pretty complete < P4 systems; since you can buy used P4s today for ~100$ I don't think it's worth the time to deal with anything less. If you are available right away I can arrange for you to come here and pick what you want.
Also have the following: -metal box with ~5u rack inside -2U 8-outlet power switch with ethernet remote control -4x cisco 2500 routers -HP Advancestack 2000 switch, redundant PSU, 12x 10mbit, 2x 100mbit, 4x 100VG -Heathkit 10-4015 Oscilloscope, 10mhz?
On 8/3/2010 1:25 PM, Colin Stanners wrote:
I'm cleaning out old hardware to make space, here's the more interesting pieces, if anyone wants them please reply or call my cell 797-1617:
MicroVAX 3800 (makes a great bedside table) Digital Server 3000 (Alpha CPU-based, PSU modded to feed CPU 3.3V direct) Sparq portable 1GB-disk drive with 3 disks Backer32 (parallel port video 'modem', 4GB on VHS tape) IBM Token Ring Concentrator 3x new Fujitsu fiber cables, 61meter, 2 fibers, ST-ST connectors Laboratory tube PSU, variable 200-325V 0.1A Ribbon cable in foil wrap, approx. 50 wires, 200ft? Konika-Minolta Magicolor 330, huge colour laser printer, needs toner/work Eurologic 4-drive SCSI/SAS array with redundact PSUs, serial mgmt Eurologic Fiberchannel 7x 73GB (1 HD bad) RAID array with redundant PSUs, fans A few 2.4ghz wifi dishes, 19-24dbi
I'm bringing a bunch of 300-800mhz PCs, 10mbit hubs, etc. to recycling places.
Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
Note it's an older model, don't think it has HTTP, likely only telnet or SNMP. I got it from someone on this list. Are you close to St.B right now?
On 8/3/2010 2:56 PM, Sean Cody wrote:
I'm VERY interested in this.
On 2010-08-03, at 2:54 PM, Colin Stanners wrote:
-2U 8-outlet power switch with ethernet remote control
I'm interested in taking a look at these: -metal box with ~5u rack inside ... -Heathkit 10-4015 Oscilloscope, 10mhz?
Kevin
On Tue, Aug 3, 2010 at 2:54 PM, Colin Stanners colin@ninja.ca wrote:
Rob: will speak with you later today
Mike/Sean: will check the number of dishes and condition and let you know
Mark: I don't have many ATX power supplies without the leaky-capacitor issues (or that are a quality brand). I'm about to recycle pretty complete < P4 systems; since you can buy used P4s today for ~100$ I don't think it's worth the time to deal with anything less. If you are available right away I can arrange for you to come here and pick what you want.
Also have the following: -metal box with ~5u rack inside -2U 8-outlet power switch with ethernet remote control -4x cisco 2500 routers -HP Advancestack 2000 switch, redundant PSU, 12x 10mbit, 2x 100mbit, 4x 100VG -Heathkit 10-4015 Oscilloscope, 10mhz?
On 8/3/2010 1:25 PM, Colin Stanners wrote:
I'm cleaning out old hardware to make space, here's the more
interesting
pieces, if anyone wants them please reply or call my cell 797-1617:
MicroVAX 3800 (makes a great bedside table) Digital Server 3000 (Alpha CPU-based, PSU modded to feed CPU 3.3V direct) Sparq portable 1GB-disk drive with 3 disks Backer32 (parallel port video 'modem', 4GB on VHS tape) IBM Token Ring Concentrator 3x new Fujitsu fiber cables, 61meter, 2 fibers, ST-ST connectors Laboratory tube PSU, variable 200-325V 0.1A Ribbon cable in foil wrap, approx. 50 wires, 200ft? Konika-Minolta Magicolor 330, huge colour laser printer, needs toner/work Eurologic 4-drive SCSI/SAS array with redundact PSUs, serial mgmt Eurologic Fiberchannel 7x 73GB (1 HD bad) RAID array with redundant PSUs, fans A few 2.4ghz wifi dishes, 19-24dbi
I'm bringing a bunch of 300-800mhz PCs, 10mbit hubs, etc. to recycling places.
Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
FYI, it appears to be the Heathkit IO-4105 single-trace 5 MHz scope. Any probes with it?
Kevin
On Tue, Aug 3, 2010 at 4:02 PM, Kevin McGregor kevin.a.mcgregor@gmail.comwrote:
I'm interested in taking a look at these: -metal box with ~5u rack inside ... -Heathkit 10-4015 Oscilloscope, 10mhz?
Kevin
On Tue, Aug 3, 2010 at 2:54 PM, Colin Stanners colin@ninja.ca wrote:
Rob: will speak with you later today
Mike/Sean: will check the number of dishes and condition and let you know
Mark: I don't have many ATX power supplies without the leaky-capacitor issues (or that are a quality brand). I'm about to recycle pretty complete < P4 systems; since you can buy used P4s today for ~100$ I don't think it's worth the time to deal with anything less. If you are available right away I can arrange for you to come here and pick what you want.
Also have the following: -metal box with ~5u rack inside -2U 8-outlet power switch with ethernet remote control -4x cisco 2500 routers -HP Advancestack 2000 switch, redundant PSU, 12x 10mbit, 2x 100mbit, 4x 100VG -Heathkit 10-4015 Oscilloscope, 10mhz?
On 8/3/2010 1:25 PM, Colin Stanners wrote:
I'm cleaning out old hardware to make space, here's the more
interesting
pieces, if anyone wants them please reply or call my cell 797-1617:
MicroVAX 3800 (makes a great bedside table) Digital Server 3000 (Alpha CPU-based, PSU modded to feed CPU 3.3V
direct)
Sparq portable 1GB-disk drive with 3 disks Backer32 (parallel port video 'modem', 4GB on VHS tape) IBM Token Ring Concentrator 3x new Fujitsu fiber cables, 61meter, 2 fibers, ST-ST connectors Laboratory tube PSU, variable 200-325V 0.1A Ribbon cable in foil wrap, approx. 50 wires, 200ft? Konika-Minolta Magicolor 330, huge colour laser printer, needs
toner/work
Eurologic 4-drive SCSI/SAS array with redundact PSUs, serial mgmt Eurologic Fiberchannel 7x 73GB (1 HD bad) RAID array with redundant PSUs, fans A few 2.4ghz wifi dishes, 19-24dbi
I'm bringing a bunch of 300-800mhz PCs, 10mbit hubs, etc. to recycling places.
Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
-
Colin Stanners -
Kevin McGregor -
Mike Pfaiffer -
Robert Dyck -
Robert Keizer -
Sean Cody