My old Sun Netra T1 and X1 servers used the same serial pinout for LOM as cisco, brocade, etc console cables. Not sure if thats the case for you or not. Theo
On Jun 10, 2015, at 3:39 PM, Dan Keizer <ve4drk@gmail.com> wrote:
Hey .. anyone have one around I can snarf for a bit?
Dan. _______________________________________________ Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
IIRC the pinout is only the same if you disable all flow control - RTS/CTS/DTR/DSR are a bit different on Sun gear as I recall. Could be wrong about this, it’s been a while. I *think* all the various xLOM serial ports used the same pinout… -- -Adam Thompson athompso@athompso.net Cell: +1 204 291-7950 Fax: +1 204 489-6515 From: Theodore Baschak Sent: Wednesday, June 10, 2015 18:28 To: Dan Keizer, MUUG Roundtable My old Sun Netra T1 and X1 servers used the same serial pinout for LOM as cisco, brocade, etc console cables. Not sure if thats the case for you or not. Theo
On Jun 10, 2015, at 3:39 PM, Dan Keizer <ve4drk@gmail.com> wrote:
Hey .. anyone have one around I can snarf for a bit?
Dan. _______________________________________________ Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
_______________________________________________ Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
Thanks Theo and Adam -- yeah .. these are a few X1's I have in the rack ... not sure why my 'purchased' adapter is having issues ... the one I made up a year or so ago worked just fine, but it is not at my home where I can see it .. so I either lent it or lost it :-( ... not having much time to (nor spare parts that I can see) to craft up a home made one ... looking to borrow ... Dan. On Wed, Jun 10, 2015 at 6:28 PM, Theodore Baschak <theodore@ciscodude.net> wrote:
My old Sun Netra T1 and X1 servers used the same serial pinout for LOM as cisco, brocade, etc console cables. Not sure if thats the case for you or not.
Theo
On Jun 10, 2015, at 3:39 PM, Dan Keizer <ve4drk@gmail.com> wrote:
Hey .. anyone have one around I can snarf for a bit?
Dan. _______________________________________________ Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
Let me get this straight… you don’t have a single Cisco console cable at home? I’d pop one over, but I’m not in the city right now, sorry. -- -Adam Thompson athompso@athompso.net Cell: +1 204 291-7950 Fax: +1 204 489-6515 From: Dan Keizer Sent: Wednesday, June 10, 2015 19:09 To: Theodore Baschak, Adam Thompson Cc: MUUG Roundtable Thanks Theo and Adam -- yeah .. these are a few X1's I have in the rack ... not sure why my 'purchased' adapter is having issues ... the one I made up a year or so ago worked just fine, but it is not at my home where I can see it .. so I either lent it or lost it :-( ... not having much time to (nor spare parts that I can see) to craft up a home made one ... looking to borrow ... Dan. On Wed, Jun 10, 2015 at 6:28 PM, Theodore Baschak <theodore@ciscodude.net> wrote: My old Sun Netra T1 and X1 servers used the same serial pinout for LOM as cisco, brocade, etc console cables. Not sure if thats the case for you or not. Theo
On Jun 10, 2015, at 3:39 PM, Dan Keizer <ve4drk@gmail.com> wrote:
Hey .. anyone have one around I can snarf for a bit?
Dan. _______________________________________________ Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
Thanks .. met up with theo close to home ... thanks for the Cable! On Wed, Jun 10, 2015, 19:10 Dan Keizer <ve4drk@gmail.com> wrote:
Thanks Theo and Adam -- yeah .. these are a few X1's I have in the rack ... not sure why my 'purchased' adapter is having issues ... the one I made up a year or so ago worked just fine, but it is not at my home where I can see it .. so I either lent it or lost it :-( ... not having much time to (nor spare parts that I can see) to craft up a home made one ... looking to borrow ...
Dan.
On Wed, Jun 10, 2015 at 6:28 PM, Theodore Baschak <theodore@ciscodude.net> wrote:
My old Sun Netra T1 and X1 servers used the same serial pinout for LOM as cisco, brocade, etc console cables. Not sure if thats the case for you or not.
Theo
On Jun 10, 2015, at 3:39 PM, Dan Keizer <ve4drk@gmail.com> wrote:
Hey .. anyone have one around I can snarf for a bit?
Dan. _______________________________________________ Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
_______________________________________________ Roundtable mailing list Roundtable@muug.mb.ca http://www.muug.mb.ca/mailman/listinfo/roundtable
participants (4)
-
Adam Thompson -
Dan Keizer -
Dan Keizer -
Theodore Baschak