[*] Double Ring

[Jonathan k. Creasy]

Is it related to progressinband?

> -----Original Message-----
> From: asterisk-bounces at muug.mb.ca [mailto:asterisk-bounces at muug.mb.ca]
On
> Behalf Of John Lange
> Sent: Monday, March 13, 2006 11:52 AM
> To: Asterisk Open Source PBX SIG
> Subject: Re: [*] Double Ring
> 
> Thats a good thought but I don't think thats the problem.
> 
> We have quite a few PAP2s that are running version 2 of the firmware
and
> we are also getting the same problem with "hard" phones like the 941 &
> 841.
> 
> It also does not happen on sip-to-sip calls, only sip-to-zap calls.
> 
> --
> John Lange
> OpenIT ltd. www.Open-IT.ca (204) 885 0872
> VoIP, Web services, Linux Consulting, Server Co-Location
> 
> On Sat, 2006-03-11 at 14:00 -0600, Kevin D Scott wrote:
> > I think this is relevant to your 'double ring' issue.
> >
> > In the advanced Line settings on the PAP2 and 2000/3000 there is a
> Sticky
> > 183 setting.
> >
> > My understanding, while very limited, is that SIP Info messages tell
> your
> > adapter to play the ringing tone, while the adapter is also
receiving an
> > audio stream data, which is heard being the 2nd ring.
> >
> > This is my understanding from reading the asterisk-users group.
> >
> > With the PAP2's this came in with version 3 of the firmware.
> >
> > I hope this helps someone.  If I am way off, meh, it happens.
> >
> > Kevin
> > _______________________________________________
> > Asterisk mailing list
> > Asterisk at muug.mb.ca
> > http://www.muug.mb.ca/mailman/listinfo/asterisk
> >
> 
> 
> _______________________________________________
> Asterisk mailing list
> Asterisk at muug.mb.ca
> http://www.muug.mb.ca/mailman/listinfo/asterisk