[*] Call Routing help

[Sean Walberg]

Yes, that's what you want.  I've never tried it, but ISTR reading that
the flakiness had more to do with the tones not being standard across
telcos.  If you do get it going, I'd like to hear how it works.

ISDN is around $100/mo (Les had posted rates a few weeks ago), plus your
equipment.

Sean

On Sun, 2006-02-26 at 09:07 -0600, M Bergen wrote:
> Hi Sean;
> 
> THey do have a distinctive ring from the telco.
> 
> I found an article about routing according to the distinctive rings
> received from the telco. It is suppose to be a bit 'flakey' but I'm
> gonig to try it.
> 
> How expensive is ISDN?
> 
> Thanks all;
> 
> Mark
> 
> 
> On Sat Feb 25 22:46 , Sean Walberg <sean at ertw.com> sent:
> 
> 
> 
>         So you have two phone numbers on the same POTS line that ring
>         the same
>         pattern? Am I missing something, because I don't see how
>         that's
>         helpful! :)
>         
>         Sean
>         
>         On Sat, 2006-02-25 at 21:09 -0600, M Bergen wrote:
>         > Hi Sean and Bill;
>         > 
>         > I still have a lot to learn!! I assumed that FXO would pass
>         on DID (or
>         > similar).
>         > 
>         > So there is no way to pass on different numbers on FXO? If
>         both
>         > numbers ring the same phone, without a distinctive ring,
>         then there is
>         > no use in keeping the 'teen line' (I'm not getting rid of
>         the PBX
>         > now!! Just starting to have fun).
>         > 
>         > Thanks again for your time.
>         > 
>         > Mark
>         > 
>         > On Sat Feb 25 20:12 , Sean Walberg <sean at ertw.com> sent:
>         > 
>         > 
>         > 
>         > On Sat, 25 Feb 2006, M Bergen wrote:
>         > 
>         > > I am not sure but shouldn't something like this work, or
>         am
>         > I way off?:
>         > > 
>         > > exten => 1234567,4,NoOp(Incoming call for Mark on
>         > #8431234567)
>         > 
>         > Should work great on a PRI or something that passes DID... I
>         > may be 
>         > wrong, but the only way to differentiate between two numbers
>         > on an FXO 
>         > line is with distinctive ring.
>         > 
>         > Sean
>         > 
>         > -- 
>         > Sean Walberg <sean at ertw.com> http://ertw.com 
>         > _______________________________________________
>         > Asterisk mailing list
>         > Asterisk at muug.mb.ca
>         > http://www.muug.mb.ca/mailman/listinfo/asterisk
>         > 
>         > _______________________________________________
>         > Asterisk mailing list
>         > Asterisk at muug.mb.ca
>         > http://www.muug.mb.ca/mailman/listinfo/asterisk
>         -- 
>         Sean Walberg <sean at ertw.com> http://ertw.com
>         
>         _______________________________________________
>         Asterisk mailing list
>         Asterisk at muug.mb.ca
>         http://www.muug.mb.ca/mailman/listinfo/asterisk
> 
> _______________________________________________
> Asterisk mailing list
> Asterisk at muug.mb.ca
> http://www.muug.mb.ca/mailman/listinfo/asterisk
-- 
Sean Walberg <sean at ertw.com>                http://ertw.com