[*] Shaw does not have QOS

[Marcus J.]

A note on the Status page, you can unplug your coax cable and the modem will 
give you a 192. or 10. address... you can then connect to the IP that served 
the address and that will show you the status of the modem (signal levels, 
uptime, db, etc...)

cheers


>
>John Lange wrote:
>
>>terminating system (´CMTS¡) which then initiates a one-time transfer of
>>software from a Shaw trivial file transfer file protocol (´TFTP¡) server
>>to the cable modem thereby initiating QoS."
>>
>
>Each cable modem has its own config file which is tftped down when the 
>modem is powered up or on request. I thought that QOS would be a setting in 
>the config file.
>
>In looking at some specs for the Motorola 5100 cable modem I came across 
>the IP address. You can access a Web page for the modem at 192.168.100.1. 
>It is only the help page no status pages. I do not know why they do not 
>allow users to see the status pages. John, perhaps you can ask the Shaw 
>tech.
>
>-- Bill
>
>_______________________________________________
>Asterisk mailing list
>Asterisk at muug.mb.ca
>http://www.muug.mb.ca/mailman/listinfo/asterisk