[*] Getting past Demo-Congrats - Help Appreciated

[Brent Hawryluk]

Well I've been banging away with help from as much documentation as I can wiggle through and at the point am obtaining a dial-tone when running Asterisk and can access the annoying "demo-congrats" message when calling the Extension through the PBX - phone associated is Analog.

I'm using a TDM400P card with all 4 channels still intact (as default I figure - the way it was given to me), 1 and 2 as FXS modules (with FXO_KS signalling defined of course) with 3 and 4 as FXO (with FXS_KS signalling).  Currently have the analog phone plugged into Channel 1 on the back of the card and the cable from the phone jack plugged into Channel 3.  Naturally, I've configured a number of files (Zapata, Extensions, Zaptel, etc.) a bit to help my cause and am unsure how much is along the right track which has taken me to where I am now, and how much more I need for a functional system (preferably with as many typical bells and whistles as possible).  

Anyone who would be generous enough to help out a fellow Winnipegger and dedicated newbie, I very much appreciate you doing so.  I would be more than happy to supply any addition info concerning the setup and conf file settings at this point.  

Thanks.

Brent


Brent Hawryluk - B.A., C.A./P.
Senior Programmer/Analyst
Pollard Banknote Limited Partnership
Email   - bhawryluk at pbl.ca
Phone - (204) 474-2080 (ext. 377)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.muug.mb.ca/pipermail/asterisk/attachments/20051201/4b3004cd/attachment.html