On Feb 13, 2024, at 2:50 PM, Hartmut W Sager <hwsager@marityme.net> wrote:
I presume your Shaw business modem is a Hitron, possibly the Hitron CODA-5810. That one, just like the former Shaw residential Hitron CGNM-2250, also allows selective IP pass-thru on a per port basis. I wish those dumb residential XB6/XB7/XB8 modems would do that.HartmutOn Tue 13 Feb 2024 at 13:27:13 -06:00, Vijay Sankar <vsankar@foretell.ca> wrote:Sure thing. My Shaw business modem is setup the same way Adam mentioned. It also allows me to use wifi and Ethernet NAT’ed through the 192.x interface and just port 2 bridged through to static IP. As you said that does require two firewalls in my case (could have done it with one of course).Sent from my iPhoneOn Feb 13, 2024, at 13:20, Kevin McGregor <kevin.a.mcgregor@gmail.com> wrote:Thank you, Vijay! I'll try to get it working without any additional hardware first, and failing that I'll let you know what I need.On Tue, Feb 13, 2024 at 10:27 AM Vijay Sankar <vsankar@foretell.ca> wrote:Hi Kevin,Most of the systems I can give away are older than 5 years. They do have intel Xeon or i7, hot swappable drives, 2 to 6 gbics, 8 to 32 GB etc.. Also I have a 12 port microtik router that may be useful in your situation (I used that to bond a bunch of services from Shaw a few years ago)Please let me know if any of this is of interest.Thanks,VijayOn Feb 13, 2024, at 8:32 AM, Kevin McGregor <kevin.a.mcgregor@gmail.com> wrote:I considered bridge mode, but I'm trying to do this without obtaining additional hardware (i.e. a firewall box of some kind). Unless some kind soul out there has a suitable spare box to donate to a non-profit?On Mon, Feb 12, 2024 at 10:18 PM Adam Thompson <athompso@athompso.net> wrote:With my Shaw account, I got them to put the modem into Bridge mode, then I treated the Ethernet 1 port as though it was a port on their router, i.e. I set my firewall’s IP to the assigned static IP.
If you want to do it with the Shaw modem acting as a router, I have no idea, sorry.
-Adam
From: Roundtable <roundtable-bounces@muug.ca> On Behalf Of Kevin McGregor
Sent: Monday, February 12, 2024 9:34 PM
To: Continuation of Round Table discussion <roundtable@muug.ca>
Subject: [RndTbl] How to set up and use static IP from Rogers/Shaw
I'm helping out someone with a Shaw Business account, and they have a static IP they'd like to set up and use for one specific server.
So generally, how do you set this up? Shaw forwards traffic with that static IP (and the dynamic one, too) to the router, and then... Enable the DMZ feature of the router and set the IP address of the server to the static one from Shaw and it just works? Or is there some other work to do?
Thanks for any help,
Kevin
_______________________________________________Roundtable mailing list_______________________________________________Roundtable mailing list_______________________________________________Roundtable mailing list_______________________________________________Roundtable mailing listRoundtable@muug.cahttps://muug.ca/mailman/listinfo/roundtable_______________________________________________Roundtable mailing list_______________________________________________Roundtable mailing listRoundtable@muug.cahttps://muug.ca/mailman/listinfo/roundtable