On December 11, 2017 2:28:36 PM CST, Sean Cody <sean@tinfoilhat.ca> wrote:
I'm sure skullspace could use it...
On 2017-12-11 14:04, Adam Thompson wrote:
Free to a good (or even bad) home:
Lexmark Optra S 1255 laser printer (working)
* Duplexer included
* Has PCL5, Postscript 3, not sure what other personalities
* 1200dpi
* Has ethernet card (works)
* 3 "trays" (1 manual, 2 trays capable of 11x14" paper)
* Still has a good amount of toner left in the super-high-volume
cartridge, IIRC
* I think it was a 35ppm printer?
Downsides:
* Fuser drum is nearing end of life - probably only has another 2~4k
pages left in it
* Paper pickup rollers are at end of life - easy enough to fix, I
can't be bothered. Mostly works.
* LCD is almost unreadable now - theoretically fixable, but again
can't be bothered. Barely works.
* Slightly larger than modern units
* Slightly heavier than modern units
First come, first served.
No bites = it gets recycled.
-Adam
Roundtable mailing list
Roundtable@muug.ca
https://muug.ca/mailman/listinfo/roundtable