<div dir="ltr"><div>If you're up for a rebuild so to speak, you can look at the ubiquiti line-up.</div><div>You can run their controller hardware (UDM/UDMpro) or host it yourself on your own pc/linux/pi device. <br></div><div>(Personally, it's an appliance, I ran it on a pi for a while, then bought the UDM, then bought the UDM pro - it just works). They keep on bringing out new features for hardware/software, so it's dead simple.    Their storefront for those:  <a href="https://ca.store.ui.com/ca/en?category=all-unifi-cloud-gateways">https://ca.store.ui.com/ca/en?category=all-unifi-cloud-gateways</a> <br></div><div>You can add access points as you see fit to fill in any weak/dead spots.</div><div><br></div><div>I have a UDMpro at home with separate switches for POE injection to the access points in the house - yes, the more the merrier :-)</div><div>What I really like is just the networking console with visibility on all my AP's and clients/etc.</div><div><br></div><div>Dan.<br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, 27 Feb 2024 at 04:53, Trevor Cordes <<a href="mailto:trevor@tecnopolis.ca">trevor@tecnopolis.ca</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On 2024-02-26 Kevin McGregor wrote:<br>
> I have a Netgear Orbi mesh (1 base + 1 satellite) in my house. They're<br>
> about 6 years old and don't support Wifi 6 (802.11ax?).<br>
> <br>
> I've noticed that in my basement it works pretty well, but upstairs<br>
> the effective data rate drops off VERY quickly when I move away from<br>
> the router (satellite). I figure this is because of the large number<br>
> of wifi routers in my neighbourhood competing for the same bandwidth.<br>
> <br>
> Would upgrading to a Wifi 6-capable router help? Any other<br>
> suggestions?<br>
<br>
Your WAP / extender may have options to boost the signal (they may be<br>
set low due to "apartment friendly" defaults).  You can also look for<br>
options to change the channel, trying "weird" ones.  Or enable an<br>
auto-scan-and-pick-least-used-channel mode.<br>
<br>
If you're doing house wiring, ditch the extender and install a<br>
standalone WAP in its place.  Extenders have the massive problem of<br>
needing to have a clear channel for both extender-to-device *and*<br>
extender-to-base.  Thus your difficulty in finding free(er) channels is<br>
doubled!  A wired WAP solves this problem.  It won't be as "meshy" but<br>
if you put both WAPs into your devices (phones) on auto-connect,<br>
they'll just switch to whatever works if the other barfs out.  And you<br>
can scale to even more WAPs if you want.<br>
<br>
You can even do PoE to the WAPs with the right switch (expensive) or<br>
standalone injectors (cheapish!) and supported WAP (or cheap<br>
de-injectors!), if the desired location isn't close to power...<br>
<br>
Ironically, I find that as the Wifi specs get better, their ability to<br>
hold signal gets worse!  My best signal ever is still my G one I<br>
relegate my visitors onto... maybe all the wifi progressions are just a<br>
scam??!<br>
_______________________________________________<br>
Roundtable mailing list<br>
<a href="mailto:Roundtable@muug.ca" target="_blank">Roundtable@muug.ca</a><br>
<a href="https://muug.ca/mailman/listinfo/roundtable" rel="noreferrer" target="_blank">https://muug.ca/mailman/listinfo/roundtable</a><br>
</blockquote></div>