<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
<style type="text/css" style="display:none;"> P {margin-top:0;margin-bottom:0;} </style>
</head>
<body dir="ltr">
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0); background-color: rgb(255, 255, 255);">
I have a Brother DCP-7065DN (scanner, copier, printer) which has been easy for me to set up with my Ubuntu Linux system. It's a black and white laser device and Brother has great steps for setting it up. It can be connected to your LAN network and communicates
through my computer with USB. <br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0); background-color: rgb(255, 255, 255);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0); background-color: rgb(255, 255, 255);">
On the software side of things to use this device, I use XSane for the scanning, both in colour and black and white, with multiple resolution options. Copying is done on the device itself, and the printer options are very flexible from any document software
I've used.</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0); background-color: rgb(255, 255, 255);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0); background-color: rgb(255, 255, 255);">
I'm sure the colour laser variety by Brother is just as Linux-friendly, but you'd have to check it out on the Brother website. Basically, if you see Linux instructions for your device, then go with it, I say. I ended up with this particular model because I
searched for Linux printer/scanner drivers and setup instructions, which ultimately led me to a very detailed setup page someone else had created which was sort of an addendum to the instructions provided by Brother.</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0); background-color: rgb(255, 255, 255);">
<br>
</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0); background-color: rgb(255, 255, 255);">
Good luck!</div>
<div style="font-family: Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0); background-color: rgb(255, 255, 255);">
-Kevin<br>
</div>
<div id="appendonsend"></div>
<hr style="display:inline-block;width:98%" tabindex="-1">
<div id="divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" style="font-size:11pt" color="#000000"><b>From:</b> Roundtable <roundtable-bounces@muug.ca> on behalf of roundtable-request@muug.ca <roundtable-request@muug.ca><br>
<b>Sent:</b> November 1, 2020 12:00 PM<br>
<b>To:</b> roundtable@muug.ca <roundtable@muug.ca><br>
<b>Subject:</b> Roundtable Digest, Vol 191, Issue 1</font>
<div> </div>
</div>
<div class="BodyFragment"><font size="2"><span style="font-size:11pt;">
<div class="PlainText">Send Roundtable mailing list submissions to<br>
roundtable@muug.ca<br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="https://muug.ca/mailman/listinfo/roundtable">https://muug.ca/mailman/listinfo/roundtable</a><br>
or, via email, send a message with subject or body 'help' to<br>
roundtable-request@muug.ca<br>
<br>
You can reach the person managing the list at<br>
roundtable-owner@muug.ca<br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of Roundtable digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. I'm looking for an all-in-one (Glen Ditchfield)<br>
2. Re: I'm looking for an all-in-one (Hartmut W Sager)<br>
3. Re: I'm looking for an all-in-one (Adam Thompson)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Sat, 31 Oct 2020 17:58:56 -0500<br>
From: Glen Ditchfield <GJDitchfield@acm.org><br>
To: MUUG Roundtable <roundtable@muug.ca><br>
Subject: [RndTbl] I'm looking for an all-in-one<br>
Message-ID: <3683915.kQq0lBPeGt@copperplate><br>
Content-Type: text/plain; charset="us-ascii"<br>
<br>
I'm looking for a color printer/scanner/copier, suitable for printing a few <br>
pages every few weeks. My current device is connected by USB to a Mac that <br>
serves as a CUPS host and runs the scanner software, and that's just fine. I <br>
look at most of the modern features being offered and rate them somewhere <br>
between "meh" and "get off my lawn" (Alexa voice-enabled printing? Seriously?) <br>
but might be willing to grant access to the local Wi-Fi.<br>
<br>
Do you have any opinions on Linux-friendly, non-abusive devices?<br>
<br>
<br>
<br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Sat, 31 Oct 2020 18:22:47 -0500<br>
From: Hartmut W Sager <hwsager@marityme.net><br>
To: Continuation of Round Table discussion <roundtable@muug.ca><br>
Subject: Re: [RndTbl] I'm looking for an all-in-one<br>
Message-ID:<br>
<CAGQr3cU-RroO5vQ4YZj8K6A5+W=i2HfyqpU+++t=wL0r8RAWtA@mail.gmail.com><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Unrelated to the "Linux-friendly, non-abusive" matter (which other members<br>
here will no doubt deal with), my immediate thought is, it CANNOT be an<br>
inkjet device. With your infrequent printing schedule, such a device would<br>
give you endless troubles and expenses with dried-out, often<br>
unresurrectable, inkjet cartridges or nozzles. If colour is not needed,<br>
then it should be a laser device. Those are fine with infrequent printing,<br>
though with such low print volumes, you'd still have the issue that even<br>
toner does deteriorate after a few years of sitting in a cartridge.<br>
<br>
Back to inkjet devices: You could print a handful of useless "maintenance"<br>
pages every 5 days or so to keep the cartridges and nozzles in good<br>
condition, which would result in way more "maintenance" pages than real<br>
pages being printed over time, with a much higher cost per real page than<br>
normal.<br>
<br>
The dot-matrix printers of the distant past didn't have the above issues.<br>
:) :)<br>
<br>
Hartmut W Sager - Tel +1-204-339-8331<br>
<br>
<br>
On Sat, 31 Oct 2020 at 18:00, Glen Ditchfield <GJDitchfield@acm.org> wrote:<br>
<br>
> I'm looking for a color printer/scanner/copier, suitable for printing a<br>
> few<br>
> pages every few weeks. My current device is connected by USB to a Mac<br>
> that<br>
> serves as a CUPS host and runs the scanner software, and that's just<br>
> fine. I<br>
> look at most of the modern features being offered and rate them somewhere<br>
> between "meh" and "get off my lawn" (Alexa voice-enabled printing?<br>
> Seriously?)<br>
> but might be willing to grant access to the local Wi-Fi.<br>
><br>
> Do you have any opinions on Linux-friendly, non-abusive devices?<br>
><br>
><br>
><br>
><br>
> _______________________________________________<br>
> Roundtable mailing list<br>
> Roundtable@muug.ca<br>
> <a href="https://muug.ca/mailman/listinfo/roundtable">https://muug.ca/mailman/listinfo/roundtable</a><br>
><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://muug.ca/pipermail/roundtable/attachments/20201031/8458d2a4/attachment-0001.htm">http://muug.ca/pipermail/roundtable/attachments/20201031/8458d2a4/attachment-0001.htm</a>><br>
<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Sat, 31 Oct 2020 20:45:09 -0500<br>
From: Adam Thompson <athompso@athompso.net><br>
To: Continuation of Round Table discussion <roundtable@muug.ca>,<br>
Hartmut W Sager <hwsager@marityme.net><br>
Subject: Re: [RndTbl] I'm looking for an all-in-one<br>
Message-ID: <9F00B13A-BE5A-4745-AB2F-92AA2A4D22FD@athompso.net><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Good news, Hartmut! Most "business" inkjets now have built-in technology to prevent the ink or the printheads from drying out. This comes at the expense of a tiny (really, it is tiny) amount of ink being used automatically every few days.<br>
<br>
I've had reasonably good luck with both Brother and Epson inkjets in recent memory, and in particular on Brother network interfaces you can disable whatever protocols you don't want. I've used the Brother MFC-J* series, and the Epson Workforce series.<br>
<br>
Both have Linux drivers that kind of suck but do work. The Epsons at least use ESC/P which is sorta standard, or at least widely supported in CUPS.<br>
<br>
Brother also makes what looks like a nice PCL color laser, but I've no direct experience with it. That would probably(?) be a better choice for traditional Linux/UNIX use.<br>
<br>
All of these support IPP, in theory, so printer drivers are supposed to be a problem of the past. Ahem.<br>
<br>
-Adam<br>
<br>
On October 31, 2020 6:22:47 p.m. CDT, Hartmut W Sager <hwsager@marityme.net> wrote:<br>
>Unrelated to the "Linux-friendly, non-abusive" matter (which other members<br>
>here will no doubt deal with), my immediate thought is, it CANNOT be an<br>
>inkjet device. With your infrequent printing schedule, such a device would<br>
>give you endless troubles and expenses with dried-out, often<br>
>unresurrectable, inkjet cartridges or nozzles. If colour is not needed,<br>
>then it should be a laser device. Those are fine with infrequent printing,<br>
>though with such low print volumes, you'd still have the issue that even<br>
>toner does deteriorate after a few years of sitting in a cartridge.<br>
><br>
>Back to inkjet devices: You could print a handful of useless "maintenance"<br>
>pages every 5 days or so to keep the cartridges and nozzles in good<br>
>condition, which would result in way more "maintenance" pages than real<br>
>pages being printed over time, with a much higher cost per real page than<br>
>normal.<br>
><br>
>The dot-matrix printers of the distant past didn't have the above issues.<br>
>:) :)<br>
><br>
>Hartmut W Sager - Tel +1-204-339-8331<br>
><br>
><br>
>On Sat, 31 Oct 2020 at 18:00, Glen Ditchfield <GJDitchfield@acm.org> wrote:<br>
><br>
>> I'm looking for a color printer/scanner/copier, suitable for printing a<br>
>> few<br>
>> pages every few weeks. My current device is connected by USB to a Mac<br>
>> that<br>
>> serves as a CUPS host and runs the scanner software, and that's just<br>
>> fine. I<br>
>> look at most of the modern features being offered and rate them somewhere<br>
>> between "meh" and "get off my lawn" (Alexa voice-enabled printing?<br>
>> Seriously?)<br>
>> but might be willing to grant access to the local Wi-Fi.<br>
>><br>
>> Do you have any opinions on Linux-friendly, non-abusive devices?<br>
>><br>
>><br>
>><br>
>><br>
>> _______________________________________________<br>
>> Roundtable mailing list<br>
>> Roundtable@muug.ca<br>
>> <a href="https://muug.ca/mailman/listinfo/roundtable">https://muug.ca/mailman/listinfo/roundtable</a><br>
>><br>
<br>
-- <br>
Sent from my Android device with K-9 Mail. Please excuse my brevity.<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://muug.ca/pipermail/roundtable/attachments/20201031/16364847/attachment-0001.htm">http://muug.ca/pipermail/roundtable/attachments/20201031/16364847/attachment-0001.htm</a>><br>
<br>
------------------------------<br>
<br>
Subject: Digest Footer<br>
<br>
_______________________________________________<br>
Roundtable mailing list<br>
Roundtable@muug.ca<br>
<a href="https://muug.ca/mailman/listinfo/roundtable">https://muug.ca/mailman/listinfo/roundtable</a><br>
<br>
<br>
------------------------------<br>
<br>
End of Roundtable Digest, Vol 191, Issue 1<br>
******************************************<br>
</div>
</span></font></div>
</body>
</html>